A botol blow cetakan design checklist harus confirm drawing quality, neck finish, material, cavity target, kecocokan mesin, cooling rute dan sampel acceptance.
A botol blow cetakan design checklist harus confirm drawing quality, neck finish, material, cavity target, kecocokan mesin, cooling rute dan sampel acceptance.
Kirim gambar botol, material, target output, cakupan cetakan, dan negara tujuan terlebih dahulu. Engineering kemudian dapat memetakan rute mesin dan rute tooling sebelum harga.
A practical checklist untuk botol blow cetakan pembeli preparing drawings, samples, cavity targets dan acceptance rules.
| Drawing package | Use dimensioned drawings, measured samples or clear front dan side photos with scale. |
|---|---|
| Neck dan seal | Neck finish, thread, cap rute dan sealing surface memengaruhi acceptance more than pembeli expect. |
| Cavity dan output | Cavity target harus match kecocokan mesin, expected output dan trial sampel plan. |
| Cooling dan material | Rute material, wall distribution dan cooling assumptions harus be reviewed before tooling. |
| Acceptance sampel | Define appearance, sealing, dimension dan trial sampel checks before final shipment. |
Prepare drawings, measured samples or scaled photos before requesting a cetakan penawaran.
Confirm botol material, volume, neck finish, cap rute dan sealing requirements.
State the target rute mesin dan cavity target so cetakan fit can be checked early.
Agree on trial sampel acceptance criteria before approving mass-production tooling.
A photo can start review, but a reliable design needs dimensions, neck finish, material dan mesin-fit context.
The neck finish controls cap fit dan sealing performance, so it must be reviewed before tooling approval.
Cavity count harus be decided after checking output target, kecocokan mesin, cetakan thickness dan trial sampel requirements.
